Fire Resistant Cable Silicone Insulation

Fire Resistant Cable Silicone Insulation
Low smoke Halogen Free PVC sheath
Aluminium Foil Screen
CopperTinned Copper Drain Wi


Fire Resistant Cable Silicone Insulation
Applications
Cables are designed, manufactured and tested for general application in power supply and signal wiring, for emergency circuit and fire circuit control.
Operating temperature
-40°C to +90°C
(for insulated conductors only: max 200°C).
Minimum bending radius
10 times the outer diameter.
Cable construction


Conductors
Plain annealed copper wire, stranded according to EN 60228 class 2.
nsulation
High performance fire resistant silicone rubber.
Cabling
Insulated cores are cabled together.
Screen
Aluminium Foil Screen       Copper Tape Screen           Copper Braid ScreedOuter sheath
LSZH thermoplastic material.
Colour red (other colours on request).
Colour code to HD 308
Without earth conductor
2 cores blue - brown
3 cores brown - black - grey
4 cores blue - brown - black - grey
5 cores blue - brown - black - grey - black
With earth conductor
3 cores yellow/green - blue - brown
4 cores yellow/green - brown - black - grey
5 cores yellow/green - blue - brown - black - grey
Applicable Standards
Fire resistant CEI 20-36/2-1 / EN 50200 (PH90) / IEC 60331-21
Flame retardant EN 60332-1-2 / IEC 60332-1-2
Fire retardant EN 50266-2-4 (cat. C) / IEC 60332-3-24 (cat. C)
Acid gas emission EN 50267-2-1 / IEC 60754-1
EN 50267-2-2 / IEC 60754-2
Smoke density EN 61034-2 / IEC 61034-2


Comments

Post a Comment

Popular posts from this blog

PVC/Round 3 and 4 Core Flat/Round Cables for pump

PVC 4 Core Flat Cables Application : Submersible Pump cables is a specialized product to be used for submersible pumps in a deep well. The area of installation is physically restrictive, and the environment is very hostile. For continuous use in deep well to supply power to submersible pumps down to depths of 500 mtrs. Cable Structure Copper: flexible copper wire or tinned copper wire   Insulation:PVC Outer Sheath: Speacial PVC : Black, Blue Cores colour: Core Identification 3 core:Black, Light Blue and Brown Red, Yellow and Blue 4 core:Black, Light Blue, Brown, Yellow with Green core/ Green with Yellow core Feature: Excellent resistant to moisture, abrasion, grace, oil. Longer Flex Life Excellent mechanical & electrical propertise. Standard: IEC 60227,  BS 6500, DIN VDE 0281, IS 694 Technical Data Operating tem.: -20 ° c to max.+80 ° C Nominal voltage: 1100 V Test voltage: 3000 V Min. ben...
Read more

16mm2 Electrical Connecting Battery Cable Power Cable with Terminals

Image
  SGX Automotive Battery Cable/Primary Wire Construction: Conductor: Bare copper Insulation: Cross-Linked Polyethylene (XLPE) Options: Available in stranded battery circuit colors of black and red with optional custom printing available   Features: Can be used for automotive starters or battery grounds where resistance to abrasion, heat and aging is needed. Meets the requirements of SAE J-1127 SGX wire has a recommended temperature range of -40°C to +125°C  
Read more

6 Gauge AWG Copper Battery Cable Terminal lug Tinned 5/16inch or 3/8inch

Image
  Construction: Conductor: Bare copper Insulation: Polyvinylchloride (PVC) Color & Print Options: Available in standard battery circuit colors of black and red with optional custom printing available. Stranding Options: SGT Cable is available with higher stranding.   Applications: Type SGT Battery Cable may be used in starter or battery ground circuits in accordance with SAE J-1127. Recommended temperature range is -40 ° C to +105 ° C. Manufactured to meet Ford (M1L-56A) and Chrysler (MS-3450)
Read more