Posts

Showing posts from November 3, 2019

FEP Teflon insulated Silver copper wires cable

Insulation   FEP  Conductor   Silver Copper Temperature Range   -65º C~+250 º C Rated Voltage   600V O.D.Tolerance   ± 0.1mm Colour   White-Blue-Red-Black-Brown-Yellow-Green-Transpanrent-Yellow/Green Used for various electric machineries,electronic ceramics,heating parts,car lights,lighting,ballast etc. Rated temperature: 200oC AC rated voltage: 300V-600V Conductor is used in single wire or stranded wire (0.014~95mm2 ) of tin-plated, silver or bare copper. Insulation is using FEP(F46) Color: Red\blue\white \ yellow \green\brown\black\grey \transparent It is corrosion-resistant and almost impossibly soluble in any organic solvent and it is oil-resistant, less high-frequency loss, moisture-proof and has big insulation resistance. Also, it is incombustible, non-aging and durable. Use Range It is used in air-conditioner, microwave oven, electric products, lighting sets, electric heater, oven, electric factory,...

Cu/XLPE/PVC/SWA/PVC 0.6/1kV

Application: 1)These cables are most suitable for direct burial or for installation on trays or ducts,  Where there is a risk of mechanical damage, armoured cables should be used. 2) For laying in ground along route with large difference of level able to bear external mechanical forces.   Standard: IEC60502,and BS6346, VDE, AS/NZS, UL,etc or as customer's request. Construction: Conductor: Solid or stranded copper, class 2 Insulation: Cross-linked polyethylene (XLPE) or Polyvinyl chloride (PVC) Filler: Polypropylene filament with lapped binding tape Binder: Binding tape Inner sheath: Polyvinyl chloride (PVC) Amour: steel wire armored(SWA) or steel tape armored(STA) Sheath: Polyvinyl chloride (PVC) Number of cores: 1,  2,  3,   3+1,   3+2,    3+3,  4,    4+1,    4+2,   5 and so on. Nominal Section Area(mm2) :1.5 2.5 4 6 10 16 25 35 50 70 95 120 15...