Multi-Core Shielded Flexible Electrical Cable/PVC Insulated and Screened LSZH Control Cable

1,APPLICATION
Copper Conductor PVC Insulated PVC Sheathed Braid Screened Rigid Control Cable(KVVP) is mainly used for system connection wire of control,signal,protection or measuring for rated voltage up to and including 450/750V.

2,BASIC INFORMATION
Code Name
KVVP
Rated Voltage (Uo/U)
450/750V
Cable Structure
CU/PVC Insulation/Braid Screened/PVC Sheathed

3,CONSTRUCTION
Conductor
Preferred Number of cores:
2,3,4,5,7,8,10,12,14,16,19,24,27,30,37,44,48,52,61
The conductors shall comply with the requirement given in IEC 60228 for class 1 or 2.
- class 1 for solid conductors;
- class 2 for stranded conductors.
Insulation
PVC(Polyvinyl Chloride) Type PVC/A according to IEC
Metallic Screened
Copper Wire Braid
Sheathed
PVC(Polyvinyl Chloride) Type PVC/ST1 according to IEC
Other special application cable can be provided upon requests:
Fire-resistant,Flame-retardant,Low-halogen,Non-halogen,Low-fume,Low-smoke,as well as acid-alkali-proof,High temperature resistant,Termite and Rodent resistant,Water proof series and so on.

4,CABLE  STANDARDS
GB/T,JB/T,IEC,BS,DIN,ICEA up on request.

5,CHARACTERISTICS
Conductor temperature
Maximum conductor temperature in normal use: 70ºC
Installation temperature
Ambient temperature under installation shall not be below 0ºC
Max.temperature of conductor under short circuit
-(Max.Duration 5 sec.)
PVC Insulated:160ºC
Preferred Permissible bending radius
For non-armoured PVC insulated cable not less than: 6 times of cable diameter



Multi-Core Shielded Flexible Electrical Cable/PVC Insulated and Screened LSZH Control Cable
Core 
number*
nominal
 cross section of 
conductor
Max 
diameter of  
conductor 
in a line
 insulator 
thickness
Shielded 
wire 
diameter
sheath 
thickness
average 
overall 
diameter
Min
insulation 
resistance 
3×0.30.160.50.150.66.50.014
3×0.40.160.50.150.66.90.013
3×0.50.210.50.150.67.10.012
3×0.750.210.50.150.67.80.01
3×1.00.210.60.150.89.10.01
3×1.50.260.60.20.8100.009
*3×2.50.260.70.2111.90.008

Comments

Post a Comment

Popular posts from this blog

PVC/Round 3 and 4 Core Flat/Round Cables for pump

PVC 4 Core Flat Cables Application : Submersible Pump cables is a specialized product to be used for submersible pumps in a deep well. The area of installation is physically restrictive, and the environment is very hostile. For continuous use in deep well to supply power to submersible pumps down to depths of 500 mtrs. Cable Structure Copper: flexible copper wire or tinned copper wire   Insulation:PVC Outer Sheath: Speacial PVC : Black, Blue Cores colour: Core Identification 3 core:Black, Light Blue and Brown Red, Yellow and Blue 4 core:Black, Light Blue, Brown, Yellow with Green core/ Green with Yellow core Feature: Excellent resistant to moisture, abrasion, grace, oil. Longer Flex Life Excellent mechanical & electrical propertise. Standard: IEC 60227,  BS 6500, DIN VDE 0281, IS 694 Technical Data Operating tem.: -20 ° c to max.+80 ° C Nominal voltage: 1100 V Test voltage: 3000 V Min. ben...
Read more

16mm2 Electrical Connecting Battery Cable Power Cable with Terminals

Image
  SGX Automotive Battery Cable/Primary Wire Construction: Conductor: Bare copper Insulation: Cross-Linked Polyethylene (XLPE) Options: Available in stranded battery circuit colors of black and red with optional custom printing available   Features: Can be used for automotive starters or battery grounds where resistance to abrasion, heat and aging is needed. Meets the requirements of SAE J-1127 SGX wire has a recommended temperature range of -40°C to +125°C  
Read more

6 Gauge AWG Copper Battery Cable Terminal lug Tinned 5/16inch or 3/8inch

Image
  Construction: Conductor: Bare copper Insulation: Polyvinylchloride (PVC) Color & Print Options: Available in standard battery circuit colors of black and red with optional custom printing available. Stranding Options: SGT Cable is available with higher stranding.   Applications: Type SGT Battery Cable may be used in starter or battery ground circuits in accordance with SAE J-1127. Recommended temperature range is -40 ° C to +105 ° C. Manufactured to meet Ford (M1L-56A) and Chrysler (MS-3450)
Read more