Flame Retardant Silicone Rubber Multi-Core Cable for Control Instrument
Applications:
1.This product is suitable for the cable of AC 50Hz, rated voltage of 0.6 / 1kV (the maximum voltage 1.2kV) for power transmission.
2.It is widely used in metallurgy, electric power, petrochemical, electronics, car manufacturing and other high-temperature resistant occasions.
1.This product is suitable for the cable of AC 50Hz, rated voltage of 0.6 / 1kV (the maximum voltage 1.2kV) for power transmission.
2.It is widely used in metallurgy, electric power, petrochemical, electronics, car manufacturing and other high-temperature resistant occasions.
Product Features:
This product has the following properties: radiation resistance, heat-resistance, cold-resistance, acid and alkali-resistance, corrosive gases resistance and water resistance etc.
Flame Retardant Silicone Rubber Multi-Core Cable for Control Instrument
Operating Property:
| |
Items
|
Description
|
Rated Voltage
|
Frequency AC rated voltage is 0.6 / 1kV. The maximum
|
voltage of using AC system is no more than 1.2 kv
| |
Operating Temperature
|
The long-term maxmium operating temperature of cable:conductor is 180 ºC.
|
Environment Temperature
|
Minimum environment temperature: fixed laying -60 ºC,
|
non-fixed laying -20 ºC.
| |
Laying temperature
|
Laying cable temperature should not be lower than -20 ºC.
|
Bending radius
|
The bending radius of single-core cable is not more than 20D,
|
the bending radius of multi-cores cable is not more than 15D.
| |
Storage
|
Finished cable should be stored at 0 ~ 40 ºC, humidity is
|
below 85% of the environment, and avoid direct sunlight
| |
and the rain, keep ventilation and dry environment.
| |
According to the above requirements for storage and use,
| |
the cable can be used for more than 25 years long.
| |
Installation Instruction
|
When installed, the environment temperature should not be
|
lower than -20 ºC. if the environment temperature is lower
| |
-20 ºC, the cable should be preheated before installation.
| |
To avoid the machnical damage of the internal cable,
| |
the bending radius should be controlled strictly.The bending
| |
radius of single core cable is not more than 20D, the bending
| |
radius of multi-cores cable is not more than 15D.
| |
("D "means the out diameter of cable)
| |
Flame Retardant Silicone Rubber Multi-Core Cable for Control Instrument
| ore No.×section | structure | insulation | thickness of the sheath | wire OD | conductor resistance 20C Deg Ω/KM | |||
| thickness | OD | nominal diameter | allowance | |||||
| mm² | No./diameter mm | mm | mm | mm | mm | mm | brass | tin-coated |
| 2×0.22 | 7/0.20 | 0.6 | 1.8 | 0.6 | 4.8 | ±0.20 | 93.0 | |
| 3×0.22 | 7/0.20 | 0.6 | 1.8 | 0.6 | 5.1 | ±0.20 | 93.0 | |
| 4×0.22 | 7/0.20 | 0.6 | 1.8 | 0.6 | 5.6 | ±0.20 | 93.0 | |
| 5×0.22 | 7/0.20 | 0.6 | 1.8 | 0.6 | 6.1 | ±0.20 | 93.0 | |
| 2×0.25 | 8/0.20 | 0.6 | 1.85 | 0.6 | 4.9 | ±0.20 | 80.9 | |
| 3×0.25 | 8/0.20 | 0.6 | 1.85 | 0.6 | 5.2 | ±0.20 | 80.9 | |
| 4×0.25 | 8/0.20 | 0.6 | 1.85 | 0.6 | 5.7 | ±0.20 | 80.9 | |
| 5×0.25 | 8/0.20 | 0.6 | 1.85 | 0.6 | 6.2 | ±0.20 | 80.9 | |
| 2×0.35 | 11/0.20 | 0.6 | 1.95 | 0.7 | 5.3 | ±0.20 | 55.0 | |
| 3×0.35 | 11/0.20 | 0.6 | 1.95 | 0.7 | 5.6 | ±0.20 | 55.0 | |
| 4×0.35 | 11/0.20 | 0.6 | 1.95 | 0.7 | 6.1 | ±0.20 | 55.0 | |
| 5×0.35 | 11/0.20 | 0.6 | 1.95 | 0.7 | 6.7 | ±0.20 | 55.0 | |
Company Information

Packaging & Shipping



Comments
Post a Comment