factory supply shielded flexible Copper electric cable

Standard

This product is manufactured according to GB/T9330, IEC60227 and IEC60502 etc.
Application
The product is suitable for connection in control, signal, protection circuit and measuring system with rated power-frequency voltage 450/750V or 0.6/1KV.
Operating characteristics
1)Rated power-frequency voltage Uo/U: 450/750V or 0.6/1KV.
2)Max. permissible continuous operating temperature of conductor: 70ºC
3)Max. short-circuit temperature of the conductor shall not exceed: (5S maximum duration) 160ºC
4)The ambient temperature under installation should not below 0ºC. Otherwise, the cable shall be preheated.
5)The recommended bending radius of a cable should be:
Non-armored cable, not less than 6 times of the cable diameter.
Armored cable or copper tape screened cable, not less than 12 times of the cable diameter.
Shielded flexible cabel, not less than 6 times of the cable diameter.



factory supply  shielded flexible Copper  electric cable
Type
Designation
KVV
Copper conductor,PVC insulated,PVC sheathed control cable
KVVP
Copper conductor,PVC insulated,PVC sheathed,Braided shield control cable
KVVP2
Copper conductor,PVC insulated,PVC sheathed,copper tape shield control cable
KVV22
Copper conductor,PVC insulated, PVC sheathed,steel tape armored control cable
KVV32
Copper conductor,PVC insulated, PVC sheathed,steel wire armored control cable
KVVR
Copper conductor,PVC insulated,PVC sheathed flexible control cable
KVVRP
Copper conductor,PVC insulated,PVC sheathed,Braided shield flexible control cable
KVVP-22
Copper conductor,PVC insulated,PVC sheathed,Braided shield, steel tape armored control cable
KVVP2-22
Copper conductor,PVC insulated,PVC sheathed,copper tape shield,steel tape armored control cable

Comments

Post a Comment

Popular posts from this blog

PVC/Round 3 and 4 Core Flat/Round Cables for pump

PVC 4 Core Flat Cables Application : Submersible Pump cables is a specialized product to be used for submersible pumps in a deep well. The area of installation is physically restrictive, and the environment is very hostile. For continuous use in deep well to supply power to submersible pumps down to depths of 500 mtrs. Cable Structure Copper: flexible copper wire or tinned copper wire   Insulation:PVC Outer Sheath: Speacial PVC : Black, Blue Cores colour: Core Identification 3 core:Black, Light Blue and Brown Red, Yellow and Blue 4 core:Black, Light Blue, Brown, Yellow with Green core/ Green with Yellow core Feature: Excellent resistant to moisture, abrasion, grace, oil. Longer Flex Life Excellent mechanical & electrical propertise. Standard: IEC 60227,  BS 6500, DIN VDE 0281, IS 694 Technical Data Operating tem.: -20 ° c to max.+80 ° C Nominal voltage: 1100 V Test voltage: 3000 V Min. ben...
Read more

16mm2 Electrical Connecting Battery Cable Power Cable with Terminals

Image
  SGX Automotive Battery Cable/Primary Wire Construction: Conductor: Bare copper Insulation: Cross-Linked Polyethylene (XLPE) Options: Available in stranded battery circuit colors of black and red with optional custom printing available   Features: Can be used for automotive starters or battery grounds where resistance to abrasion, heat and aging is needed. Meets the requirements of SAE J-1127 SGX wire has a recommended temperature range of -40°C to +125°C  
Read more

6 Gauge AWG Copper Battery Cable Terminal lug Tinned 5/16inch or 3/8inch

Image
  Construction: Conductor: Bare copper Insulation: Polyvinylchloride (PVC) Color & Print Options: Available in standard battery circuit colors of black and red with optional custom printing available. Stranding Options: SGT Cable is available with higher stranding.   Applications: Type SGT Battery Cable may be used in starter or battery ground circuits in accordance with SAE J-1127. Recommended temperature range is -40 ° C to +105 ° C. Manufactured to meet Ford (M1L-56A) and Chrysler (MS-3450)
Read more